Home>Products>UPS Battery>

24V 3.7Ah 35C Discharge Rate Li+UPower Series UPS Modular Battery

24V 3.7Ah 35C Discharge Rate Li+UPower Series UPS Modular Battery
24V 3.7Ah 35C Discharge Rate Li+UPower Series UPS Modular Battery

24V 3.7Ah 35C Discharge Rate Li+UPower Series UPS Modular Battery

24V 3.7Ah 35C UPS power supply battery is one of the Li+UPower series UPS LiFePO4 module batteries manufactured by Grepow Battery, using soft pack high-power rate lithium iron phosphate batteries, support up to 35C high-current discharging, suitable for the need for high-power standby power supply for important core equipment as a special UPS standby power supply, to protect the safety of the equipment application.
Online information
Product Details

24V 3.7Ah UPS Battery Specification Parameters

Battery Type

 Lithium iron phosphate (LiFePO4)

Cell Technology

 Stacking Pouch Cell

Nominal Voltage

 25.6V

Internal Resistance

 ≤60 mΩ

Max.Series Connections

 2S

Cycle Times

4000 cycles

Max. Parallel Connections

 No upper limit

Dimensions (L x W x H)

 152*66*95mm

Nominal Capacity

 3.7Ah

Weight

 1100±100g

Watt-hour

 94.72Wh

Waterproof and Dustproof Grade

 IP54

Overvoltage Category

 Class II to 4000m

Secondary Protection

 Available

Certifications

 UN38.3, CB, UL1973, CE-EMC, FCC, UKCA, Battery Directive, REACH, ROHS

Charging Specifications of 24V 3.7Ah UPS Battery

Full Charge Voltage

 28.8V

Maximum Charging Current

 6.5A/1.7C/0.75h

Standard Charging Current

 0.74A/0.2C/7.5h

Charging Temperature

-10℃~60℃


Discharge Specifications of 24V 3.7Ah UPS Battery

Operating Current

 1.85A (47.36W)

Discharge Cutoff Voltage

 18.4V

Standard Discharge Current

 0.74A (19W)

-20℃ Low-Temp Discharge Current [Last 30s]

 0.74A (19W)

Maximum Continuous Discharge Current

 25A (640W)

+60℃ High Temp Discharge Current [Last 30s]

 45A (1152W)

Discharge Temperature

 -20℃~60℃

Li+ UPower Series 24V 3.7Ah UPS LFP Battery Advantages

●UPS Battery Comparison of Lead-acid (SLA) vs. Li-iron Phosphate Battery

UPS Battery Comparison of Lead-acid (SLA) vs. Li-iron Phosphate Battery

GREPOW Li+ UPower series use soft pack stacked LiFePO4 batteries, which are a replacement for traditional lead-acid UPS batteries.

Due to the special stacking process, it can realize ultra-high rate charging and discharging performance, and the volume and weight can be reduced by about 50% under the same discharging current requirement, and it can even be discharged continuously with high current in -20℃ low temperature environment, with energy density ratio as high as 150Wh/kg, and the cycle life as high as 4,000 cycles, and maintenance-free cost, which can save a large amount of manpower cost for the enterprise and significantly reduce the total operating cost.

Battery Type

Discharge Rate

Cycle Life

Weight

Low Temp Discharge Performance

Fast Charge

Energy Density

Maintenance Cost

Grepow LiFePO4

Max.40C

4000+

-50%

-50°C

Max.3C

150Wh/kg

Maintenance free

Conventional Lead-Acid

X

400+

+50%

-20°C

X

50~70Wh/kg

Maintenance per 3 months

Comparison

Higher discharge current

Longer life

Lighter

Lower temperature

Faster

Higher

More cost effective


● UPS Battery Comparison of Steel-Case Cylinder Wound LiFePO4 vs. Soft-Pack Stacked LiFePO4

UPS Battery Comparison of Steel-Case Cylinder Wound LiFePO4 vs. Soft-Pack Stacked LiFePO4

●24V 3.7Ah UPS LFP Battery Product Certification

国际性认证图749x299.png

Grepow Li+ UPower Series UPS LFP Battery Modules come with multiple international approvals, such as:

  UN 38.3, IEC62133, UL1642, UL991, UL1973, CE incl EMC, RoHs, 2006/66/EC, REACH, FCC.


●24V 3.7Ah UPS Battery BMS Protection Board Function (Includes Secondary Protection)

 Overcharge protection

 Equalization function

 Short circuit protection

 High and low temperature protection

 Charge overcurrent protection

 Over-discharge protection

 Discharge overcurrent protection (with secondary protection)


●24V 3.7Ah UPS LFP Battery Supports High Current Charging and Discharging

Li+UPower series UPS power supply LFP batteries use high-rate lithium iron phosphate cells, which can support up to 3C fast charging and 40C high-current discharging; 250C discharging 0.3 seconds, fast response during power outage time to provide power support for equipment.

Li+ UPower Series 24V 3.7Ah UPS Power Battery Application Areas

Din-Rail DC-UPS, Industrial UPS


General Process
Inquiry
01
Evaluation
02
Specification & Verification
03
Quotation
04
Sample Production
05
Price Verification
06
Production Schedule
07
Shipment
08
Related products
Related applications
Related articles