The Difference Between Lipo and NiMH Battery

The biggest difference between NiMH and LiPo batteries is the chemical properties that enable the charging of the batteries. NiMH (Nickel-metal hybrid) uses nickel-based technology and LiPo (Lithium Polymer) batteries use a lithium-ion technology.

What the battery types have in common is that they both store a certain amount of energy depending on their capacity. Batteries can be manufactured with different voltages and capacities by installing battery cells in series or parallel inside the battery pack. One should be careful not to drop the batteries or damage the cases of the battery cells because it can cause a short circuit. Both battery types must be disposed of properly as hazardous waste.

The Batteries Differ in Their Properties and Uses.

NiMH batteries are easier to use. They must be fully discharged before charging and must be charged full before storing (Unless Manufacturer tells otherwise. Exampl. Traxxas). NiMH battery chargers are also very simple.

LiPo batteries don’t have to be fully discharged and they must be stored with a 50-70 % charge level. The charging must be done with a charger with balance charging. It is good to charge and store LiPo batteries in a LiPo safe bag.

Properties and remarks on NiMH batteries:

Nimh battery

  • Easy and worry-free charging and storing “Safe choice for beginners”
  • Cheaper to manufacture
  • A common battery type in home appliances and devices
  • Rated voltage of cells 1.2V
  • Must be fully discharged before charging
  • Storing fully charged (Unless Manufacturer tells otherwise. Exampl. Traxxas)
  • Batteries are built with standard sized cells with metal cases
  • “Memory effect”: Batteries must always be fully discharged in order to keep full capacity available

Properties and remarks on LiPo batteries:

lipo battery

  • Easy to use with the right devices
  • Manufacturing process is more complicated
  • Becoming a common battery type in home appliances and devices
  • Rated voltage of cells 3.0 V when discharging
  • A charger with balance charging must always be used for charging
  • Storing with 50-70 % charge level (Voltage per cell 3.85V-3.9V)
  • A LiPo safe bag must be used when charging and storing
  • Lighter than NiMH
  • Can be built in different sizes
  • “Memory effect”: almost non-existent, batteries don’t have to be fully discharged before recharging

The advantages of lithium batteries compared to NiMH batteries are undeniable.

The weight/power ratio in LiPo batteries is significantly better. LiPo batteries are noticeably lighter and they can store the same amount or more energy relative to their capacity than NiMH batteries. The power output of LiPo batteries is greater in quality and quantity. The power output of LiPo batteries is steady throughout the discharge, whereas the power output of NiMH batteries starts to decrease soon after charging because of higher discharge rate of the battery type.

Therefore with a LiPo battery with the same capacity as a NiMH battery a longer drive time and better performance can be achieved.

Learn more about Nimh or Lipo Battery information, please pay more attention to Grepow blog, or email us: info@grepow.com

High C-rate NiMH Batteries | Grepow-Battery Manufacturer
High C-rate NiMH Batteries | Grepow-Battery Manufacturer

A nickel metal hydride (NiMH) battery is similar to a nickel cadmium (NiCd) battery, but it has higher capacity, less Read more

What is the maximum discharge rate of Ni-MH battery? | Battery Monday
Battery Monday 20201026 banner

Introduction In the last week, we described you all the details of lithium battery C-rating. Today, we would discuss the Read more

Nimh Battery: Safety, Usage And Difference
Grepow Nimh battery

Nickel metal hydride battery (Commonly abbreviated to “Nimh battery”) has dominated the market today. This is because the battery chemistry is Read more

What is the Maximum Discharge Rate of Ni-MH Batteries?
What is the Maximum Discharge Rate of Ni-MH Batteries?

Nickel metal hydride (Ni-MH) batteries are generally not suitable for high-rate charging and discharging, but they are widely used in Read more

Share to

Leave a Reply

Your email address will not be published. Required fields are marked *

*

code