Lithium Iron Phosphate (LFP)
Stacking Pouch Cell
Max. Connection in Series
Max. Parallel Connection
Size (L x W x H)
Waterproof and Dustproof Grade
Class II, within 4000m
UN 38.3, IEC62133, UL1642, UL991, UL1973, CE incl EMC, RoHs, 2006/66/EC, REACH，FCC
Full Charge Voltage
Maximum Charge Current
Standard Charge Current
Discharge Cut-off Voltage
Standard Discharge Current
-20℃ Low Temp Discharge Current [Continuous discharge 30s]:
Max Continued Discharge Current
+60℃ High Temp Discharge Current [Continuous Discharge 30s]:
Grepow Li+UPower series uses pouch-cell stacked LiFePO4 battery, which is a prefect replacement for traditional lead-acid UPS battery module.
We using the stacked process, achieves high-rate charge and discharge performance. Under the same discharge current requirements, the size and weight can be reduced by around 50%. It can even continue high-current discharge at a low temperature of -20°C. The energy density ratio is as high as 150Wh/kg, and the cycle life is as high as 4000 cycles. Maintenance-free, it can save a lot of labor costs for enterprises and greatly reduce the total operating costs.
Maintenance per 3 months
Higher discharge current
More cost effective
Grepow Li+ UPower Series UPS LFP Battery Modules are available with various international approvals including:
UN 38.3, IEC62133, UL1642, UL991, UL1973, CE incl EMC, RoHs, 2006/66/EC, REACH, FCC.
Short circuit protection
High and low temperature protection
Charge overcurrent protection
Discharge overcurrent protection
Li+UPower series UPS power supply LFP batteries use high-rate lithium iron phosphate cells, which can support up to 3C fast charging and 40C high-current discharging; 250C discharging 0.3 seconds, fast response during power outage time to provide power support for equipment.
Din-Rail DC-UPS, Industrial UPS